Jellyfishphoto

How it worksJellyfishphoto may share some similarities in handling to the Polaroid emulsion transfer method—it’s clever name comes from the ‘jellyfish’ appearance the emulsion takes on in the tray—but it relies on pigmented digital inkjet ink to create the color or black and white image. The ink is printed onto a receiving layer and that in turn is adhered to a transparent polyester base with a water-soluble adhesive. The digital transparency is soaked in cool water for approximately two minutes. When it is softened, the emulsion aka the ‘jellyfish’ is gently lifted and re-applied to the substrate of your choice. Besides the final substrate such as fine art paper, all you need is a tray, cool water and a table to work on.

https://www.youtube.com/watch?v=xx4eSk7zKcM 

polaroid transfer

Earlier this year I tried Polaroid emulsion lifts for the first time. An emulsion lift (or emulsion transfer) is when the emulsion layer is removed from a sheet of instant film and then transferred to a different surface.

I’ve always thought they would be hard to do and was surprised at how easy and fun it was, so I thought I’d put together a little step by step guide to making instant film lifts!

DIY: Make Easy Photo Transfers on Wood

Why Wood I Do This?

Photo transfers are a neat and pretty cheap way to get your favorite pics on the some of the coolest material around—wood!

As a super-hands-on DIY, you can really make this project your own based on how you want your photo transfer to look–distressed and textured, or supa-clean and smooth.

You can also transfer the photo love—these would make lovely gifts for friends, and they’d be fun to make with friends.

Plus, this DIY would make for an epic weekend of craftery—especially for those long, rainy ones!
Ze Ingredients:



Lovely photos to transfer
Light-colored wood piece or panel
Simple photo-editing program
Access to a laser printer
Scissors
Bone folder (edge of a gift card works)
Matte gel medium (found in the acrylic paints section of the art store)
Mod Podge with your choice of finish (we went with matte)
2 different brushes (can be bristles or foam)
Towel rag
Scrap paper & towels to protect your work surface
STEP 1: Put It in Reverse

Open up the photo file you wanna use for this transfer in a photo-editing program and reverse it.

Why in reverse? You’re going to be laying the photo face-down on the wood surface you’re transferring it on, so you want your photo to end up facing the right way when it’s revealed on the flip side.

Check that your photo is set at 300 DPI so that it won’t print out all pixelated.

Don’t forget to also size your photo to fit on the surface of your wood piece. In our case, we made sure our photo of rad cacti will fit nicely on our oval wooden plaque.

Psst—we got our wooden plaque at Jo-Ann’s, and the small wood squares at Michaels. For bigger pieces or to get custom-cut pieces go to home improvement places like Home Depot.
STEP 2: Laser Print it Out—Pew, Pew!

Get your reversed, properly-sized, 300 DPI photo printed from a laser printer on fairly thin paper (like 24 lb paper, for you paper nerds).

You want your photo printed on thinner paper because this’ll make it easier in Step 8 when you’re going to rub the paper fibers off.

We got double prints of our photos just in case our scissors go hay-wire in the next step.
STEP 3: Scissor Action

Cut out the laser-printout of your photo.

Be careful; scissors can get pretty sassy sometimes.
STEP 4: Gel It Up

First, cover your work surface with some scrap paper.

Then take one of your brushes and use it put on a thin layer of matte gel medium right on top of your photo.
STEP 5: Flatten It Out

Now, very carefully lay your photo face-down on top of your wood piece.

Once you got your photo in place, use a bone folder (or the edge of a gift card) to smooth out and flatten any air bubbles underneath your photo.

Wipe off any extra gel medium that seeps out of your photo’s edges as you’re smoothing it out.
STEP 6: Let It Dry

Now it’s time to let your photo transfer sit and dry for at least 8 hours.

Depending on when you started this DIY, you may pick up on this project the next day. In any case, it’s time to take a break—go snap some more awesome photos or bake yummy dinosaur-shaped cookies.

We also think this would also be the perfect time to catch up on Photojojo’s phoneography blog or Tumblr… :)
STEP 7: Soak It Good

Once your photo transfer has been out to dry for 8 hours or so, it’s time to give it a good water-soaking.

First, protect your work surface with some fun towels.

Then take your towel rag and get it wet with some water.

Squeeze out excess water from your rag—you don’t want a sopping wet rag—and lay it on top of your photo transfer.

Press the wet rag on top of your photo transfer, making sure the photo in the transfer is completely soaked. You can also just let the wet rag sit on top of the transfer for a couple of minutes if you’d like.
STEP 8: Rub-A-Dub-Dub

First, put on some good jams. This part needs to take its sweet time.

Now that your transfer is soaking wet, use your rag and/or your fingers to rub off the fuzzy white paper fibers and to reveal your lovely photo underneath.
For a distressed look to your transfer, use the wet rag to rub off the paper fibers. The rag’s own fibers will also rub off a bit of your photo that’s revealed.
For a less-distressed, cleaner look, use your fancy fingers to rub off the fibers.

Let the transfer dry a bit in between paper-rubbing sessions so you can see any paper fibers that still need to be rubbed off.

In our experience, the best consistency for being able to see and peel off the fuzzy fibers is when your photo transfer is almost dry.

FYI: Depending on how large your photo transfer is, this step may take a while. Our small oval plaque took us about 30 minutes of paper peeling to get to our liking. If anything, don’t rush it, lest you ruin all your hard work up until now.
STEP 9: Dry It Some More

You’re almost done, hooray!

Let your photo transfer completely dry.

Again, if you notice as it’s drying that there are some fuzzy fibers you missed (like our photo shows), you can always go back and moisten your transfer a bit to rub the fibers off some more.
STEP 10: Mod Podge It Up

Once your photo transfer is dry and satisfactory to your creative eye, use the Mod Podge and your other brush to seal your hard work.

That’s it! Your photo transfer is done and ready to be the limelight.